MICROSWITCH SERIE MP200
The MP200 is a IP67 sealed snap action microswitch with potted cable for demanding industrial applications. An IP68 protection with strengthened cable outlet and increased actuating force for operation in liquids is also available. All actuators are in stainless steel for maximum protection in hazardous industrial environments.
The switch can be supplied with 2 different electrical circuits. The MP210 Version is a single pole double throw microswitch for a power rating of 15A / 250VAC. In its MP220 version a single pole double break circuit can double-break a power line of up to 10A / 250VAC.
Operational Temperature rating under EN61058 is -40°C to +130°C, but temperature rating as well as the power rating may change based on the selected potted cable material and cross section.
Descriptions |
MP210 |
MP220 |
|
Contact type Za |
||
Approval |
EN 61058-1 UL 61058-1 File E314075 |
EN 61058-1 UL61058-1 File E314075 |
Standard |
EN 61058 50'000 cycles UL 61058 50'000 cycles |
EN 61058 50'000 cycles UL 61058 50'000 cycles |
Power rating |
250VAC / 15A - Wires 1.50 mm2 (PVC and SI Cable) |
250VAC / 10A - Wires 1.00 mm2 |
Housing | Glass fiber reinforced (PBT) | |
Plunger | PC | |
Membrane | Fluorsilicone - Upon request other material | |
Mechanism | Snap-action with blade in Beryllium Copper | |
Contact material | Fine Silver, Gold contact upon request | |
Termination cable |
PVC -20°C to 105°C - EN/UL approval PUR -40°C to 90°C - MP210 EN/UL approval - MP220 EN approval SI -40°C to 130°C - EN approval |
|
Actuator | All parts in stainless steel | |
Degree of protection |
IP67 - Upon request IP68 |
|
Class of protection | II | |
Micro-switch | μ | |
Contac-gap | 0.80 mm | |
Dimensions |
DIN 41 635, E - form 49 x 35 x 17.5 mm |
|
Operating range force | 0.2 to 6.0 N, depending on actuator | |
Operating temperature housing (cable choice may lower temperature) |
EN 61058 -40°C to +130°C UL 61058 -40°C to +125°C |
|
Mechanical life | 50 x 106 |
Actuator |
Type 0 : Basic switch | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 17.4 ± 0.5 16.5 ± 0.3 0.25 0.10 |
|
Type 1S29 : Plunger | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 29.3 ± 0.6 28.4 ± 0.3 2.0 0.12 |
|
Type 1A : Plunger, thread short | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 39.1 ± 0.6 38.4 ± 0.3 5.0 0.12 |
|
Type 1A58 : Plunger, thread | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 58.0 ± 1.0 57.2 ± 0.3 10.0 0.12 |
|
Type 1BL : Roller plunger, thread - Upon request steel roller , transversal roller | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 51.4 ± 0.6 50.7 ± 0.3 5.0 0.12 |
|
Type 3A : Lever - reverse action - Upon request lever other side | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 31.1 ± 1.5 29.0 ± 1.5 3.5 0.80 |
|
Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 35.5 ± 1.5 32.5 ± 1.5 3.5 0.90 |
|
Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 41.6 ± 1.5 38.6 ± 1.5 3.5 0.90 |
|
Type 7A40 : Direct action adjustable lever | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - Ajustable - 1.20 |
|
Type 7AC : Direct action adjustable lever | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.2 0.05 - Ajustable - 5.00 |
|
Type 8AL40 : Direct action adjustable roller lever | ||
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - Ajustable - 1.20 |
Standard wiring diagram |
Code Actuator | Diagram | Color | ||
Direct action |
0 1S29 1A 1A58 1BL 7A40 7AC 8AL40 |
MP210 |
PVC : 1 / Brown - 2 / Black - 4 / Blue SI : 1 / Red - 2 / White - 4 / Blue PUR : 1 / Red - 2 / White - 4 / Blue |
|
MP220 |
PVC : 11/12 - Brown ; 13/14 - Blue SI : 11/12 - White ; 13/14 - Blue PUR : 11/12 - Brown ; 13/14 - Blue |
|||
Reverse action |
3A 5AL 6AL |
MP210 |
PVC : 1 / Brown - 2 / Black - 4 / Blue SI : 1 / Red - 2 / White - 4 / Blue PUR : 1 / Red - 2 / White - 4 / Blue |
|
MP220 |
PVC / PVCU : 11/12 - Brown ; 13/14 - Blue SI : 11/12 - White ; 13/14 - Blue PUR : 11/12 - Brown ; 13/14 - Blue |
Ordering information |
MP2 | 1 | 0 | - | 5AL | / | 3 | 100 | / | 200 | SI | |
Circuit 1 : Changeover 2 : Double break type Za |
|||||||||||
Contact material 0 : Silver contact 1 : Gold contact |
|||||||||||
Actuator 0: Basic switch - pin plunger 1S29 : Plunger 1A : Plunger, thread short 1A58 : Plunger, thread 1BL : Roller plunger, thread 3A : Lever - reverse action 5AL : Roller lever - reverse action 6AL : Stiff roller lever - reverse action 7A40 : Direct action adjustable lever 7AC : Direct action adjustable lever 8AL40 : Direct action adjustable roller lever |
|||||||||||
Number of conducteur 3 : MP210 Changeover 4 : MP220 Double break |
|||||||||||
Wires Section 100 : 1.00mm2 - 400VAC / 10A (MP210); 250VAC / 10A (MP220) 150 : 1.50mm2 - 250VAC / 15A (MP210) |
|||||||||||
Length of cable 200 : Length 2m 400 : Length 4m |
|||||||||||
Cable material PVC : -20°C to +105°C SI : Silicone -40°c to +130°C PUR : Polyurethane -40°C to +90°C |