MP600 SERIES


The MP600 Series are M8 and M12 cylindrical mechanical sensors.

The long life sensing mechanism is designed to accurately detect two positions with a high degree of repeatability.

 

• 1 Device – 2 switching points
• Extended temperature range
M8 and M12 formats
• Easy mounting and adjustment

 

 


 

The MP600 series of mechanical position sensors detect one or two positions within a single, compact electromechanical component.

 

Two independent commutations can sense two previously defined positions to within a few microns of accuracy. The two positions can be set specifically for each application, between 0.5mm and 1.5mm and require no further calibration. Depending on cable selection, the operating temperature can go from -30°C up to 130°C. The cable can be supplied with a connector termination, typically M8 or M12.

 

 


Applications are in the automation, process control and OEM industries that require today two switches for position control. The MP600 series solves the time consuming adjustments required because of the hysteresis effect caused by the sensors or snap action switches currently used. Initially designed for compact detection of status and wear of industrial safety brakes, numerous other uses are envisaged, in particular in the field of industrial automation. They include accurate position referencing as well as upper and lower threshold detection in process control applications.


For ease of integration and enhanced functionality, custom housing shapes can be easily implemented. 

 

 

Technical  Characteristics

 

 

    Options
Approvals

UL 61058-1, File E314075

 
Housing Brass, nickel plated -  cylindrical format Stainless steel
Membrane HNBR elastomer  
Mechanism Contacts Slow action  
Contact material Gold plated  
Degree of protection IP50 or IP67  
Class of protection II  
Micro-switch μ  
     
Actuator Polymer Pin  

Stainless steel Pin

other metallic material
Ball  
Telescopic  
Contact distance NC-NO 0.5 to 1.5mm custom distance
Circuit NC+NO, NC or NO  
Cable length 0.5m, 1m, 2m and 5m custom length
Connector M8 - M12 available, -25°C to 85°C, PUR  
Cable material

Cable and wire leads:  Standard 0.14 mm2 / 26 AWG

PVC -20°C to 105°C

PUR -30°C to 90°C

SI -30°C to 130°C

other material
     
Power rating 24VDC / 5 to 100 mA  
Repeatability ± 5 µm  
Hysteresis < 7 µm  

Operating temperature range

UL 61058 -30°C to +130°C depending on cable and connector

-55°C
Life span

10 Mio cycles

 
B10d > 30 Mio, 24VDC 10mA  
Standards

UL61058     50'000 cycles

 

 

 

 

Description

 

The sensors are built with a NC and a NO contact. There is no pre-travel of the pin plunger to open the NC contact.
The NO closes after a customized length of travel between 0.5 mm to 1.5 mm.

 

 MP600 Circuit

 

 

Configurations Housing

                             

M8

Pin polymer - Pin metallic

M8 with Ball

M8 with Telescopic MP600 TEL MP600 TEL Cote

M12

Pin polymer - Pin metallic

MP600 M12 pin

M12 with Ball

MP600 M12 bille

 

 

Configurations Actuator - Circuit

            

Type

L0X : Pin polymer

L2X : Pin metallic

         
pin   Contact distance (mm) - Circuit
  Pre-travel (mm)  Over-travel min. (mm)  Fa max. (N)
   

L00

L20

 0.5 mm NC+NO

 0 mm to open NC

0.5 mm to close NO

1.5 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   

L01

L21

 1 mm NC+NO

0 mm to open NC

1 mm to close NO

1 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   

L02

L22

 1.5 mm NC+NO

0 mm to open NC

1.5 mm to close NO

0.5 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   

L03

L23

 NC only

0 mm to open NC

 2 mm

1.2 (N) to open NC

   

L04

L24

 0.5 mm NO only

0.5 mm to close NO

1.5 mm after NO signal

3 (N) to close NO

   

L05

L25

 1 mm NO only

1 mm to close NO

1 mm after NO signal

3 (N) to close NO

   

L06

L26

 1.5 mm NO only

1.5 mm to close NO

0.5 mm after NO signal

3 (N) to close NO

   

 

      

Type

L1X  : Ball

         
bille1 Contact distance (mm) - Circuit
  Pre-travel (mm)  Over-travel min. (mm)  Fa max. (N)
   
L10  0.5 mm NC+NO

 0 mm to open NC

0.5 mm to close NO

1.2 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   
L11  1 mm NC+NO

0 mm to open NC

1 mm to close NO

0.7 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   
L12  1.5 mm NC+NO

0 mm to open NC

1.5 mm to close NO

0.2 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   
L13  NC only

0 mm to open NC

 1.7 mm

1.2 (N) to open NC

   
L14  0.5 mm NO only

0.5 mm to close NO

1.2 mm after NO signal

3 (N) to close NO

   
L15  1 mm NO only

1 mm to close NO

0.7 mm after NO signal

3 (N) to close NO

   
L16  1.5 mm NO only

1.5 mm to close NO

0.2 mm after NO signal

3 (N) to close NO

   

           

      

Type

L5X : Telescopic not available with M12 housing

         
TEL Contact distance (mm) - Circuit
  Pre-travel (mm)  Over-travel min. (mm)  Fa max. (N)
   
L50  0.5 mm NC+NO

0 mm to open NC

0.5 mm to close NO

6 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   
L51  1 mm NC+NO

0 mm to open NC

1 mm to close NO

5.5 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   
L52  1.5 mm NC+NO

0 mm to open NC

1.5 mm to close NO

5 mm after NO signal

1.2 (N) to open NC

3 (N) to close NO

   
L53  NC only

0 mm to open NC

 6.5 mm

1.2 (N) to open NC

   
L54  0.5 mm NO only

0.5 mm to close NO

6 mm after NO signal

3 (N) to close NO

   
L55  1 mm NO only

1 mm to close NO

5.5 mm after NO signal

3 (N) to close NO

   
L56  1.5 mm NO only

1.5 mm to close NO

5 mm after NO signal

3 (N) to close NO

   

 

 

Termination

 

 

  With Cable With Circular connector 4 pins  

COM

NC

NO

Brown / Brown

Black / White

Blue / Green

1

2

4

M12 Circuit male

 

 

 

 

Standard Configuration - Ordering information

 

  MP6 0 1 - L 0 0 -C 1 0
PVC __

Housing

0 : M8 Metal IP67

2 : M12 Metal IP67

5 : M8 Metal IP50

7 : M12 Metal IP50

                     

Contact

1 : Gold plated contact

                     
                       

Actuator

0 : Pin polymer

1 : Ball

2 : Pin metallic

5 : Telescopic - not available with M12 housing

                     

Contact Distance - Circuit

0 : 0.5mm NC+NO

1 : 1.0mm NC+NO

2 : 1.5mm NC+NO

3 : NC only

4 : NO only 0.5mm

5 : NO only 1.0mm

6 : NO only 1.5mm

                     
                       

Cable length

0 : 0.5m

1 : 1m

2 : 2m

5 : 5m

                     

Connector

0 : Without

1 : Circular M12 - 4 pin PUR Cable

2 : Circular M8 - 4 pin PUR Cable, not available with telescopic Actuator

               

 

 

 

   

Termination material

PVC : Polyvinyl Chloride

PUR : Polyurethane

SI : Silicone, not available with circular connector

                     

Termination outlet

FL : Free wires